본문 바로가기

컴퓨터/기타 하드웨어 정보

Crucial M4 5000시간 사용경과 후 블루스크린 관련 펌웨어 업데이트 방법. (Crucial M4 Firmware download 0309)


Crucial M4가 5000시간 사용하면 블루스크린을 뿜어낸다는 보고가 있었는데 이에 대한 펌웨어 업데이트가 올라왔네요. 





펌웨어 다운로드 페이지: Crucial.com


M4 용 펌웨어 링크가 4개로 되어 있습니다. 각자의 용량에 따라 다운로드 받으시면 될 것 같습니다. 해설과 릴리즈 노트가 영문으로 되어 있는데 읽어보시려면 읽으시면 될 것 같습니다.

영문 주의사항
 
WARNING: The firmware update process is done entirely at your own risk. Before initiating the update process be sure to backup or make copies of all important files. If the firmware process is interrupted your solid-state drive may not function properly.

Downgrading firmware has been suggested by some as a possible fix for various issues. However, doing so will cause the drive to be unusable, and also voids your Crucial SSD product warranty. Please do not attempt to downgrade (a.k.a. down rev) the firmware from version 0006 to version 0002. If you have questions or need assistance, please contact our Technical Support department.

 

Release note
 
Release Date: 01/13/2012
Change Log:
  • Changes made in version 0002 (m4 can be updated to revision 0309 directly from either revision 0001, 0002, or 0009)
  • Correct a condition where an incorrect response to a SMART counter will cause the m4 drive to become unresponsive after 5184 hours of Power-on time. The drive will recover after a power cycle, however, this failure will repeat once per hour after reaching this point. The condition will allow the end user to successfully update firmware, and poses no risk to user or system data stored on the drive.
This firmware update is STRONGLY RECOMMENDED for drives in the field. Although the failure mode due to the SMART Power On Hours counter poses no risk to saved user data, the failure mode can become repetitive, and pose a nuisance to the end user. If the end user has not yet observed this failure mode, this update is required to prevent it from happening.

If you are using a SAS Expander please do not download this Firmware. As soon as we have a Firmware Update that will work in these applications we will release it.

 


설치 방법은 다운받은 iso 파일을 CD/DVD나 USB에 구워 부팅하시면 됩니다. 간단히 'yes' 라고 타이핑 한 번 눌러주면 알아서 업데이트 됩니다.


펌웨어는 위 링크로 가시면 아래 사진의 체크된 부분에서 받으시면 됩니다.




■ 제가 업데이트한 방법

 
1. USB에 굽기.
2. 재부팅
3. 'DEL'키를 눌러 하드디스크 모드를 'AHCI'에서 'IDE'로 변경.
4. 'USB'로 부팅.
5. 'alternative' 선택.
6. 'yes' 입력.
7. 재부팅.
8. 'IDE' 모드에서 'AHCI'로 다시 변경.
9. 부팅 후 완료.
 

펌업으로 인한 문제를 Crucial에서도 책임지지 않는다고 하는만큼, 저도 업데이트 방법으로 인한 SSD 벽돌현상에 대해서 책임지지 않습니다. 일단 제가 펌업 성공한 것은 이렇게 해서 되었습니다.




■ 설치화면 예시 



F11 키를 시작할 때 눌러 USB로 부팅되게 하였습니다. 메인보드에 따라 그냥 나둬도 알아서 부팅되는 것이 있다고 하니 선택은 자유입니다.



'Default' 를 누르니 자꾸 이 화면으로 돌아와서 'alternative'를 누르니 되네요. 아무거나 되는 것으로 하세요.




위의 과정을 거치면 아래 화면이 나오는데 'yes' 한번 쳐주면 펌업이 됩니다.




'Finished' 가 나온 것을 보고 '재부팅'하면 됩니다. "펌업 도중에 끄지 마세요."




펌업하고 윈도우로 돌아와서 버전을 보니 버전이 0309로 바뀌었습니다.


M4가 이런 시한폭탄 기능이 있는지 몰랐네요. 5000시간 뒤에 괴롭힐 것을 생각하면 펌업을 해야할 것 같은 느낌이네요.